Laboratory data logger software for every instrument
Log temperature, pH, conductivity, dissolved oxygen, flow and mass automatically, from new and legacy instruments alike.
Automatic data logging across the lab
Inniti works as a laboratory data logger for every connected instrument. Readings such as temperature and humidity are captured automatically, stamped with the time they were measured, and kept with a full history, so nobody has to copy values from a display into a notebook or spreadsheet. The data can be watched live, exported, or sent on to your LIMS, ELN or SDMS.
Temperature data logging
Continuous temperature logging for freezers, fridges, cold rooms, incubators and probes.
pH and conductivity
Every pH and conductivity reading kept with its time and instrument.
Dissolved oxygen and flow
DO and flow sensor values logged from bioreactors and process setups.
Balances and scales
Mass readings recorded straight from the balance, with no transcription.
Any instrument
Data logging for new and legacy instruments
Inniti is manufacturer-agnostic. Instruments connect through their data port, including RS-232 and USB, and older instruments with no built-in connectivity can be brought in too. The instrument library covers more than 3,300 instruments and keeps growing.
- Connects over RS-232, USB and CSV output
- Instruments from any manufacturer, new or old
- One logger for the whole lab instead of one per device
Every reading kept
Timestamped history for every parameter
Each reading is stored with the exact time it was measured. Open the history of any parameter to see how it moved over minutes, hours or weeks, and set an alert so you hear about a drift as it happens.
- Measured-at timestamp on every value
- Trend history from minutes to weeks
- Threshold alerts with a full alert history
Data that moves on
From data logger to LIMS, ELN or SDMS
Logged data does not stay locked in the logger. It is structured following FAIR principles and can be exported for reports and audits, or sent on to your LIMS, ELN, SDMS or cloud platform.
- Export for reporting and audits
- Push to your LIMS, ELN or SDMS
- Structured following FAIR principles
Walkthrough
In practice: logging a pH and temperature run
An example of how readings from two instruments are logged from start to finish.
- 1
Connect the instruments
Connect the pH meter and temperature probe through an Inniti connector, whatever their make or age.
- 2
Choose what to log
Pick the parameters to record, such as pH and temperature.
- 3
Log automatically
Readings are recorded as they arrive, each with its measured-at time.
- 4
Set an alert
Add a threshold so you are notified if a value drifts out of range.
- 5
Review and send
Open the history, export it, or send it to your LIMS or ELN.
Why use Inniti as your lab data logger
- No manual transcription of instrument readings
- Timestamped values from every connected device
- Works with legacy RS-232 and USB instruments
- Live dashboards and threshold alerts
- History for trends, reporting and audits
- Data sent on to your LIMS, ELN or SDMS